Pre wash King Carthur Total Snow Foam

King Carhur Total Snow Foam is a really effective dissolving pre-wash that removes even the most stubborn dirt from the washable surface without mechanical contact. Total is a great choice when you want to give the vehicle a thorough cleaning and there is dirt on the surface that cannot be removed with wax-safe detergents. In addition to stubborn dirt particles, Total removes e.g. grease, road salt and old waxes, so it leaves behind only a perfectly clean surface. This pre-washer should be used, for example, when it has been a while since the car was washed or when you want to prepare the car for, say, a new wax or coating. Soluble prewash is a good choice even when you don't have much time to wash the car.

When diluted well, Total can be used for all possible cleaning tasks, from small details to washing heavy equipment. Strongly diluted, it is perfectly suited as a general cleaner, while raw or a slightly diluted mixture, it removes practically all dirt, grease and wax from the surface. Total is also excellent for thorough washing of coated cars, and its ingredients open up the clogged coating, restoring its repellency. Total Foam is best applied either with a foamer or a pump bottle, but it is also suitable for sprinkling if necessary.

King Carthur Total Snow Foam does not contain dyes, wax or other ingredients that weaken the washing performance - its design is focused solely on achieving the best washing result. Thanks to this, it is perfectly suited for thorough cleaning of the car. Total is biodegradable, so it is also suitable for washing jobs at home, and thanks to the dilutable mixture, it can be used for cleaning practically all hard surfaces.

Note! If you are looking for an effective wax-safe prewash that preserves the car's wax surface, we recommend King Carthur Control Foam .

Choose King Carthur Total Snow Foam if:

You are looking for an effective solvent detergent
You appreciate the perfectly clean end result
You want to do the laundry quickly

Dude's tip : Foam Total on particularly stubborn areas as a raw or slightly diluted mixture with a pump bottle, then use a foamer to foam a new layer of substance on the surface. In this way, you get a longer effect time and a more effective mixture on really stubborn spots, which removes even the toughest dirt!

Dude's comment : "The best foaming bio-slider that Dude knows. Total Foam should be used with a foamer, especially in spring and autumn, but also when you need to remove not only dirt, but also wax, grease, salt and pitch from the car's surfaces. A very effective substance, but at the same time gentle on the paint surface. With smart use, also very sufficient, only about 1 desi per car is enough. Strong recommendation!"

"King Carthur's product development aims at one single destination: Whether it's a permanent coating, a small brush, or anything in between, KC's products must be the absolute top of the range. The manufacturer's selection covers washing and cleaning agents as well as polishing and protective products as well as various accessories. The brand is known for extremely high-quality and high-performance car care products that are suitable for daily professional use as well as for home and hobby use. The power and other properties of the ingredients will not leave even an experienced user cold. When you choose King Carthur, you know you will get the best performance and quality in every category."

Recommended mixes

• 1:100 - 1:200 = Sensitive surfaces, interiors
• 1:50 = General cleaner, more stubborn indoor dirt
• 1:5 = For wax removal
• 1:3 - 1:1 = Strong motor oil residues and other very difficult dirt

Features

• Product: Solvent detergent King Carthur Total Snow Foam
• Used for: Pre-washing, washing, stubborn dirt
• Packaging: Plastic canister with screw cap
• Package sizes: 1000 ml, 5000 ml and 25000 ml
• Dilution ratio: 1:1 to 1:200
• Strong washing power
• "All-around" solvent cleaner, diluted for unlimited targets
• Biodegradable, environmentally friendly
• Strongly alkaline

Quick Guide

Mix the detergent carefully before use and dilute according to the purpose of use. Lather on the surface to be treated and let it take effect, but do not let the substance dry on the surface. To improve the washing performance, you can use, for example, a microfiber cloth, a microfiber glove or a brush. Rinse thoroughly. For example, in indoor areas where rinsing is not possible, wipe off the detergent first with a wet cloth and then with a dry and clean cloth.